Steel hot water boiler EKO-CKB P 20 – 50 kW

 

EKO-CKB P (20 – 50 kW) GI

Steel hot water boilers (with nominal heat output 14 – 110 kW) are engineered for solid fuel, wood pellet,oil or gas firing to meet heating demands from the smallest to the largest  remises, as a main or as an alternative heat source. This product can be easily recognized by its modern design, by its synthesis of modern technologies and its quality of material, as well as through its simple and easy assembly and its straightforward operation and control. The application of well developed and thoroughly tested technical solutions makes these boilers safe and reliable. A particular feature of these boilers is the ease of integration of any suitable burner and boiler controls. Manufactured in compliance with European standards EN 304 and EN 303-5.

CHARACTERISTICS OF EKO-CK P BOILERS:

  • Hot water boiler for central heating systems is produced for solid fuel, pellets, oil or gas firing (nominal heat output 14 – 110 kW).
  • A carefully sized combustion chamber with triple pass flue gas flow assure boiler operation at high efficiency . This makes the boilers very economical to use.
  • The combustion chamber is made out of high quality 5 mm thick steel sheet.
  • The large door and combustion chamber enable firing with big pieces of wood, as well as easy cleaning and maintenance.
  • If required a thermal safety system can be built in through already prepared apertures.
  • A thermostat for pump control is built in.
  • The body of the boiler is delivered separately from the casing and the thermal insulation which enables easier transportation and assembly with reduced risk of damage.
  • The basic standard boiler is delivered with a boiler water temperature gauge as well as a cleaning set with an ashtray.
  • Boilers for oil/gas firing are delivered with an appropriate aperture on the lower door to take the burner.
  • Boilers for pellet firing require the appropriate lower boiler door to be delivered, together with the necessary pellet set (Cm pelet-set).
  • When firing oil/gas or pellets, turbulators must be installed in the boiler (factory delivery with Cm Pelet-set, additional order for firing oil/gas).
  • The basic boiler regulator control unit of the burner (for oil/gas firing) is delivered separately. It can be connected via the upper casing lid of the boiler.
  • These boiler are tested and certified in accordance with the European standards EN 303-5 and EN304 at the Faculty of Engineering in Zagreb and are manufactured in compliance with ISO 9001:2008 standards.

STR-07-2013-eng

Obligatory (solid fuel firing, without CAS accumulation tank) – draught regulator, manual 4-way mixing valve; (closed heating system) – thermal safety valve, heat exchanger, safety-air vent group (2,5 bar) and expansion vessel; (open heating system) – open expansion vessel.

Obligatory (solid fuel firing, with CAS accumulation tank) – draught regulator, CAS accumulation tank, 3-way thermostat valve; (closed heating system) – thermal safety valve, heat exchanger, safety-air vent group (2,5 bar) and expansion vessel; (open heating system) – open expansion vessel.

Obligatory (pellet firing) – Cm Pelet-set; (closed heating system) – thermal safety valve, heat exchanger, safety-air vent group (2,5 bar) and expansion vessel; (open heating system) – open expansion vessel;

Obligatory (oil/gas firing) – boiler regulation for boiler EKO-CK, oil/gas burner; (closed heating system) – air vent group and expansion vessel; (open heating system) – open expansion vessel.

HOT WATER SUPPLY REQUIREMENTS:

The boiler EKO-CK P can be connected to one of our hot water heaters hanging hot water heaters SKB Digior LKB Digi, standing hot water heaters TB, with solar hot water heaters STEB or with combined hot water heaters CAS-B or CAS-BS, if there is a need to build in a solar heating system in the future.

PRICES:

 2016.08.01 -30% 

Стальной котел с встроенным бойлером
Art. Photo Name  EUR
 EUR +21%
18290       EKO-CKB P (20 – 50 kW) GI Steel hot water boiler with DHW EKO-CKB P 20 1 586,20 1 919,30
18291 Steel hot water boiler with DHW EKO-CKB P 25 1 690,92 2 046,01
18292 Steel hot water boiler with DHW EKO-CKB P 30 1 823,36 2 206,27
18293 Steel hot water boiler with DHW EKO-CKB P 35 1 909,60 2 310,62
18294 Steel hot water boiler with DHW EKO-CKB P 40 2 023,56 2 448,51
18295 Steel hot water boiler with DHW EKO-CKB P 50 2 154,46 2 606,90
Obligatory EKO-CK P/CKB P
12561/21198  logo-Centrometal-GI STS 3/4” 60,37 73,05
12562  logo-Centrometal ausinimas  1” L=600 mm 80,08 96,90
17707  logo-Centrometal-turbo

EKO-CK P/CKB P (set)

2,43 2,94
Разрез котла: Технические характеристки:
EKO-CKB P (20 – 50 kW) PJUVIS Таблица Eko CKB-P 20-50